Easy circuit for “nested” triggering

clockintegrated-circuitpulse

I need a trigger circuit that gives several high pulses for an "out_0". After 5-6 pulses from out_0, it then gives one high pulse for an "out_1".

I don't need any circuit that's large or has high component count… so 555 ICs in astable mode or microcontrollers are kind of a no, no…

I'm sure there's a special IC out there that only needs a single resistor and/or a capacitor to set the timings AND can do the triggering in a "looped" or "nested" way… and, if it's also very rare I could always order it online.

EDIT:
by a "single resistor/capacitor", i mean just one every nest.

Best Answer

Despite your "no MCU's" desire the obvious answer is a low pin-count example like a PIC10F or 12F. Around 5sqmm of PCB space for a SOT23-6 case and an 0402 cap is all you would need.