Electronic – Altium says the labels are floating

altiumbusschematicswiring

Been using Altium and multi sheet projects for a while.
My latest project involves a lot of signals so I'm trying to keep things tidy using lots of labels, ports, busses.

So I have a bus for enable signals going from the microcontroller sheet, to the stuff that needs to be enabled. And the same for fault conditions, current senses and so on.

Example of bus use

I have like 4 of the same for different busses.
Now Altium keeps saying that all the NET labels on the port side are floating.
Nothing I can do about this: I tried everything I could think of, but still I have some 20 floating nets.
In the next pic you can see the multi sheet connections I made: a repetition of a sensor sheet, all 8 of them hooked on a bus, and the bus going to the microcontroller.

Multi sheet connection

So I haven't got anything floating really, yet Altium still sees it that way.
Why is that?

Best Answer

I'd say yes you do have floating signals.

In picture 2, the diagonal lines are just graphical elements, they are not wires.

also: Did you specify the sub-schematic in the second picture as "REPEAT"?