I am looking for small size(preferably pcb mount) wifi antenna that is directional, more specifically half sphere coverage area. The product I build stays on the ground and I like utilized antenna that is always looking up.
I looked at several ceramic antenna datasheets but could not see one that fits. What type of antenna I should look at?
UPDATE
Based on the response, I thought I should define the problem differently. I have a working product where there is a wifi on top of the product and there are sensitive analogue circuits below the wifi antenna/module. I occasionally get spikes in my analogue circuit (analog has very high gain, about 5M times) when the module is receiving data (TX is fine). Currently, I slapped a EMI absorber on top of my analog stuff and shipped the product, unfortunately this also reduces my wifi coverage/signal by about 10db. In the next version of the product, I like to replace my omnidirectional antenna with a more directional one and avoid signal loss. Hence the question of perfect half sphere of antenna. Now that I know that is not possible, either I need an antenna that has a cone shape coverage or more shielding on Analog which I really like to avoid.
Best Answer
I would consider a patch antenna. With a thick enough substrate you can cover the entire Wi-Fi 2.4 GHz band. It has a pretty decent front to back ratio (>10 dB) and an almost onmi hemispherical pattern.
While it is impossible to say for sure from you description, it doesn't sound like the antenna is the problem. If it were, you would have had a lot more problems in Tx than Rx (Tx is usually at least 50 dB above Rx). The fact that you are having problems in Rx makes me suspect some sort of coupling between your LNA and analog circuitry. When you put absorbers, you are lowering the signal level in the LNA (or further down the receive chain) and decrease the coupling.