I am planning to use LTC2451 which is a ADC with I2C interface. The main bus voltage that supplies the LTC2451 & the MCU is 3.7V and the GPIO voltage of the MCU is 1.8V. Is it safe to pull up the SDA & SCL lines of the ADC to 1.8V when the ADC VCC is 3.7V?
Electronic – Do I need to pull up the I2C voltage to the VCC of a ADC
adci2c
Related Topic
- Electronic – How many pull up resistors per I2C bus
- Electronic – I2C address computation
- Electronic – Why I2C designed to work with pull-up resistors and not pull-down ones
- Electronic – arduino – how to choose the right pullup resistances for i2c lines with multiple slaves
- Electronic – I2C multiple masters, one master has internal pull up, do I need external pull up
Best Answer
Datasheet says you must pull to Vcc. Look at the Vil and Vih.