Electronic – Help ID SMD components

identificationsurface-mount

RVG sensor board

I need some help correctly identifying the U9 and U10 components on the PCB. I've tried some codebooks and I found several options.

For U9:

H1 – X6603 is a 300mA, low quiescent, high PSRR, low noise and low dropout linear
regulator, but the model marked with "Lv" is a 4.7V and this board is a 3.3V

H2 – Toshiba 200 mA CMOS Low Drop-Out Regulator with Fast Load Transient Response TCR2EF series, but Pin 4 is connected to capacitor C46 and it should be NC…

For U10:

H1 – "4FD" – in the 2011 edition of the active smd components guide, it's a FT521FDa, LDO, Dual out, Vout1/Vout2=2.7V/1.8V±2%, 250mA, +CE, but again it should be 3.3V (4FJ).

Any help?
Thanks.

Best Answer

Your U10 is a Microchip 24FC256 - spot the logo in the pin-4 corner?

I suspect that your U9 might be a Linear technology LTC1663.
The pin connections for VCC(pin-4) and GND(pin-2) are almost certainly correct, making C46 its decoupling cap.

Related Topic