Electronic – How to connect the pickit 3 with PIC32MX795

picpickit

I bought a USB 32-Bit Whacker – PIC32MX795 Development Board and a MPLAB PICkit 3 after working with some ATmega stuff in the past.

enter image description here

These are the 6 pins(on the pickit). I'm looking for them on the whacker board. I can find

  • vpp
  • 3.3v
  • gnd
  • pgd
  • pgc

in a row, but i'm wondering 2 things

  • is vdd the same as 3.3v?
  • where / what / do I need the LVP?

Best Answer

Be sure to look through the datasheet for both the PIC32MX795 and the datasheet for the PicKit 3...These are explained in there. Also looking at schematics for dev kits can make this an easy problem to solve as well.

A quick googling revealed this as well