I am working on a complex 8-layer PCB to which I have made a number of changes and improvements.
I now want to sent the board out for production and want to check for any unnecessary cost. One of the things I want to check is for any buried vias. The board has plenty of blind vias. If a buried via is found, I want to design it out.
My question is; How do you find buried vias in Altium Designer?
Best Answer
In Altium Designer, have the PCB file open.
PCB
menu.PCB
from the menu.The PCB tab opens and by default docks to the left-hand side.
Hole Size Editor
.Top Layer
orBottom Layer
and select the check box.The burried vias will show up in the areas highlighted above, if any.