Electronic – How to remove this component from PCB

pcbpcb-assemblyreworksoldering

Anyone have any idea how I could remove this component?

I've tried blowing hot air, used solder wick, tried to poke the holes with two soldering irons, cut the pins to near the PCB, but it won't budge.

It would be ideal if I had a rectangular piece of metal that could get up to around 380 degrees celsius and that I can just place on the pins all the while pulling to remove the component.

enter image description here

enter image description here

enter image description here

enter image description here

Best Answer

You need a lot more solder, so as to cover all the eight contacts and heat them to their melting point. Think "solder pool." Once you pull the component, then you can remove the solder pool using whatever means you have at hand.

As the comments attest, this will make the part very hot. Silicone gloves have come to the rescue when desoldering large parts, for me.