I want to get full list of supported AT commands and other undocumented codes for some cell phone. I found that using strings
command (on linux or win alternative) I can get all ASCII or UTF constant strings from firmware binary file, but it is a junk.
I don't have any JTAG hardware.
Maybe I should get fullflash from the device and look for some interrup routines.
Is there any other way to get these info?
Best Answer
In order to get a list of all supported AT commands, you can just run
AT+CLAC
which will list just that. It is a standardized command which, although optional, I assume virtuall all manufacturers support. Sony-Ericsson phones (as well as other phones based on platforms from Ericsson/ST-Ericsson) also supportAT*
as an alternative command (with an optional numeric parameter for different output formatting (e.g.AT*2
)).