Electronic – In Eagle board editor, how to remove origin mark eaglepcb-design In Eagle board editor, how to remove origin mark? Once set, I can move it, but can't remove it. Best Answer Type "mark;" into the command bar. Press enter. This toggles the mark. If you type it again the mark will reappear where you last had it. Related SolutionsElectronic – How to set a new reference point within Eagle CAD I just figured out how to do this. I'm using Eagle 6.5 fwiw. MARK (C -7.5 -4.1); Sets the origin to (-7.5 -4.1). The C says "left click". It also works if you type MARK and then actually left click with the mouse where you want the reference to be. The manual and some docs on MIT's website are definitely worth a read here and there. For example: http://web.mit.edu/xavid/arch/i386_rhel4/help/25.htm To set the origin back to the natural origin, you just type MARK; Electronic – Eagle create new package – set origin in PCB sigh...! it's been a while and no one has answered this. The other day, I did some searching and tried it well with "mark" command. This command works in both schematic and layout window in Eagle. Topic closed! :D Related TopicElectronic – Eagle: Remove some text of a component labelElectronic – Reshaping the board in eagleEagle Board Editor: Garbage or stray marks of a particular component stays back even after moving itElectronic – How to connect same signal pads in Package Editor in EagleElectrical – How to change pad size in design rule in EagleElectronic – eagle library–updated footprint wont show in board
Best Answer
Type "mark;" into the command bar. Press enter.
This toggles the mark. If you type it again the mark will reappear where you last had it.