componentsidentificationsurface-mount
This is a board from a Johnny Lightning V-bot, it has these SMD 6 pin components that just have a M03 and a dot on one of the terminals. Does anyone have a datasheet or any idea on how to ask for one to replace it? It helps with switching direction on a motor that transforms the upper half, and it's right on top of the hip motor connector.
This is the component, roughly 2.9 mm by 1.5 mm:
This is where it goes:
It's this plug-in LED module from Phoenix Contact:
https://www.phoenixcontact.com/online/portal/us?uri=pxc-oc-itemdetail:pid=2833657&library=usen&tab=1
Plug-in module, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 12 ... 24 V DC ±20 %
The F1 component is a diode, probably a zener in an SOD962 or SOD882 package. There isn't going to be a good way to find this part without the exact dimensions and the diode voltage.
The red square looks like what is left over from a WLCSP4 or other BGA part, without exact dimensions there is no way to be sure. Without the markings on the part it will be impossible to identify it (Could be one of these)
Best Answer
It's most likely an ROHM QS6M3 dual N+P channel MOSFET.