I want to power two opamp rails with +-12V.
For that I want to use this component to obtain +/-12V split supply from a 24V single supply.
But I came across the following statement:
TLE2426 splits the opamp rails and references signal ground but not
output ground.
What does that mean? Can I use use TLE2426 to power rail-to-rail opamp rails?
Best Answer
That device is a virtual ground maker. That is, it creates a reference point half way between the rails. You would supply your op-amps with 24V and Ground and use the output of this device as your signal/analog ground.
Something like this.
simulate this circuit – Schematic created using CircuitLab
Note internals of the rail-splitter is simply a voltage divider and a unity gain op-amp buffer.
As such it can't source or sink more than 20mA so do not use it for higher currents.
Addition: Note the circuit can be equally labelled as follows.
simulate this circuit