Identifying a part from game console controller


I need help identifying the following part. It came out of an old console game controller. It's labeled "SUP A9 103J". Googling it did not help. It's got ten pins and it was soldered into a space labeled "x9". I think it's some sort of crystal, but I'm not sure.

enter image description here

Best Answer

That is very likely a resistor network/array. And is used where you have a lot of parallel signals you need pulled up or down or even individual resistors.

enter image description here

This picture is snipped from the Bournes catalogue.

and comes in many internal resistor styles

enter image description here

Related Topic