Which output and input should I use on this function generator


I'm planning to generate a signal and amplify it. I couldn't find the manuals but I have the detailed pics.
The function generator:

And the amplifier is here

My question is:
1) The function generator has 2 outputs (ttl/cmos and 50ohm), which one should I use?
2) The amplifier has 2 inputs, one is balanced sym and one is not balanced, which one should I use?

Best Answer

For the function generator you must use the 50 Ohm output. Use the asym input on the amplifier (1/4 inch phone plug.) You will need a cable with a BNC connector on one end and a 1/4 inch phone plug on the other. Connect the shield on the BNC (outer connection) to the sleeve on the phone plug.

Related Topic