Firewall – Palo Alto monitor bandwidth usage using SNMP

firewallpalo-altosnmp

I'm trying to monitor bandwidth usage on my Palo Alto firewall using SNMP. However only the ifInOctets & ifOutOctets counters of VLAN interfaces are updated. The counters for real interfaces are all 0. Is there something I need to turn on?

Edit: Palo Alto 3020

Best Answer

We are monitoring Palo Alto 3020 with Solarwind NPM and able to get in BW usage logs for both VLAN & physical interface. You can refer the below link for detail config https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClHaCAK

Related Topic