AVR programmer power supply (ISP ATMEGA16 ATmega32 Minimum Board)

atmegaavrisppower supplyprogrammer

In description of an AVR programmer, it is talked about everything except for the input voltage and how to turn it on.

How much voltage should I apply to it?

Somewhere it has mentioned "DC-005 Power Block" but I dont think it means 5 volts.

Other sellers also have not mentioned.

Here are the description from the seller:

enter image description here

100% brand new and high quality
Quantity:1pc
Weight:46 g
Color: as picture show
Size:88mmx38mm/3.47"x1.49"(inch) (approx)
Product Features:
1. 32 I/O pin all the leads.
2. Classic ATmega16 minimum system, eliminating the hassle of soldering.
3. Crystal: The socket hole welding facilitate the buyer to replace the crystal, 8M crystal.
4. Support chips: ATmega16/ATmega32 and chip which pin-compatible. 
5. Power supply: power adapter or external expansion pin power supply (not support ISP download interface power supply)
6. DC-005 Power Block (supporting the transposon is 5.5*2.1mm).
7. Expand outside 4 channel VCC, GND.
8. Reset: Power-on reset and reset button.
9. Power LED (D1) and the program run indicator (D2).
10. Standard ISP download interface.

Note: This minimum system development board without AVR chip, you need purchase for chip in additional!!!!

Best Answer

This is not an AVR programmer, although it has an ISP connector where you can attach it. If you need an AVR programmer then search for something like USBasp.

Related Topic