Skip to content
Valuable Tech Notes
  • Electrical
  • WebApp
  • Magento
  • Software
  • Network
  • Server
    Is discontinuous conduction mode of a buck converter more efficient than continuous conduction mode
    Steer multiple LEDs with one microcontroller pin
    Does the SPI protocol specify how many clock pulses a master device should send to the slave
    Using a 2 A, 48 VDC rated switch in a 8 A, 12 VDC circuit
    LTSpice change output voltage of gate
    Is it ok to set the unused I/O pins of the ATmega8A to input and connect all of them to ground
    Control LEDs with 74HC595 shift register through SPI
    Why does STM32CubeIDE debugger always stop on HAL_Init()
    LM2907 – Too many iterations without convergence – Proteus
    Powering a micro-controller using the SCT-013-000

Posts navigation

Older posts