Connector Identification – Help Identify Pink Connector for NordicTrack Elliptical

connectordcpower

I salvaged an elliptical machine from the dump, and the only issue it has is a broken barrel jack power harness (please see this link for a picture of the harness I want to build) — this part costs something like $70.00 CAD (not including customs) by the time it's shipped.

I went on digikey and found the 32T barrel jack for one end of the harness, for approximately $2.36! On the other end, there is the pink three position connector. I don't know what type of connector that is, but it's not an XHR connector. Does anyone know what manufacturer / part number that connector is?

As requested, I've posted some pictures and found the pitch between pins. The pitch is .1 " / 2.54mm between the pins.

Here are the better quality image links:

enter image description here
enter image description here
enter image description here
enter image description here

Best Answer

Thank you for the pictures and the pitch. That is a knock-off of TE's MTA-100. It is not a TE part because the MTA-100 a) is insulation displacement (not crimped) and b) does not have a in-line male plug. I checked other, similar parts from other brands, but none match yours.

This is how I would fix it: get an MTA-100 PCB header and solder the cable's wires to its pins, then protect each pin with a short piece of heat shrink tubing.

Better yet, do as @Spehro Pefhany said: fix the present cable.

Related Topic