Electrical – Net connection is not showing in PCB view in Altium

altium

I don't find why in PCB view, my component(highlighted) is not connected to chip whereas in schematic it is connected to the chip and there no error in the schematic.The highlighted cap(C307,100nF) is not showing any white line to the chip VDDC. enter image description here

The VDDC is a pin which is visible on the IC.
enter image description here

Please find this unknown pin: pin Cxxx-x error while updating the schematic to PCB which I saw now.enter image description here

Also, i find a small circle on each component. how can I remove them?
enter image description here

I am new to Altium. Hope to hear from you guys soon.

Best Answer

If I am not mistaken, Altium shows the air-wires only between the component and the nearest pad/track/via of the same net. It does not show airwires to all connections with the same net. That would leave to a VERY messy ratsnest that would not help with routing at all. If you drag the highlighted capacitor closer to the IC than to the other capacitor, you will see the airwire jump to the IC pad instead.

Related Topic