What is the 'piano' THT footprint for? Are these used for signal probing?
See the second layout, as different from the first (KiCad ScreenGrabs).
Best Answer
That's a DIP switch array, just that the switches don't move left or right, but up or down. The component visually resembles a (musical) keyboard, hence the name.
If you have a current version of kicad, try the 3D viewer (there's a button for that in your window). You'll see the component in 3D!
Leon's link is right on the mark as far as importing downloaded libraries into KiCad.
I highly recommend all of the posts from curiousinventor.com. Start here and go through all of the posts. There aren't that many, and they are quick and easy reads.
In a nutshell, the icons in the toolbar are your friends, so learn them right away. You'll put parts into you schematic with the "Place a Component" function in the right toolbar. You can pick the part you want by using "Select by Browser", or you can do a keyword search. The problem with the keyword search is that if you've modified a component and saved it into your own custom library, when you search for the keyword you'll get multiple instances, and you won't be able to tell which library the instance is from! So in this case, "Select by Browser" is the way to go.
I use Eagle and, despite its huge libraries, most of the time I prefer to create my own footprints since I can adjust them to suit my needs.
For example, I usually use a 0.25 grid and the 0603 capacitor as it is on the library doesn't allow a 0.25 mm trace to pass between pads with a 0.25 mm clearance without warnings so I redesigned the footprint so it generates no warnings.
Besides that, it is common not to find the components you need on the libraries or to make slight modifications to adjust them to your design preferences.
Best Answer
That's a DIP switch array, just that the switches don't move left or right, but up or down. The component visually resembles a (musical) keyboard, hence the name.
If you have a current version of kicad, try the 3D viewer (there's a button for that in your window). You'll see the component in 3D!