I need help in designing a differentiator using an op-amp. I know that the equation for an op-amp differentiator circuit is Vo = RCdVin/dt, but I don't know how to calculate the component values to finish the design. All of the web resources that I have viewed so far shows the characteristic equation of the differentiator, but they don't give any guidance as to how to calculate the actual values. Can somebody help me with this please?
Electronic – Calculating resistor and capacitor values for an op amp differentiator circuit design
componentsdesignoperational-amplifier
Related Topic
- Write \$V_{A}\$ in terms of \$V_{in}\$ and the resistor values algebraically in a Op-Amp
- Electronic – Op-amp differentiator and integrator circuit: resistor and capacitor values
- Electronic – Op amp design with both voltage and current gain
- Electrical – Calculating resistor values for a Schmitt Trigger and LDR circuit
- Electronic – Equation to calculate voltage divider resistor value for an input of op-amp
Best Answer
That formula is all you need...in theory.
In practice the circuit tends to be unstable due to the capacitance on the input interacting with the finite bandwidth of the op-amp. This is remedied by placing a resistor in series with the input capacitor:
This link gives an elementary explanation of why this works. It will also modify your differentiating characteristic somewhat, adding a pole at 1/(2*pi*R1*C1) So basically, it's an ideal differentiator at lower frequencies only. A more complete explanation of the stability issue can be found here.