I'm designing a 68000-based VGM player, and I'd like it to output some sort of 'visualization' of the currently playing song to a TV through either RGB or Composite (video encoder probably for that.) I'm thinking of using this system to display video (and running the sync and RGB through a composite encoder instead of VGA) and then just taking the RAM onto my main CPU as needed, but that just seems horrid and from my calculations won't give me much more than 15-20 FPS.
So, I guess the question is this – is there an easy way I can get my 68k to somehow output RGB/composite video to a television? My requirements are relatively low as anything with the resolution of around 240×240 will work, but it needs to get me around 30FPS with my main CPU taking a considerable share of the time writing to the VRAM.
Best Answer
Stop press: Added last. I just had a good look at the AVR hardware based VGA Generator that you posted. They start with a simple version and work up over 16 pages. If you used the 68000 as the processor it would take lot of resource. But, if you used an AVR dedicated to he task and added a simple serial link from the 68000 then this solution is potentially very good. 3 ICs to give flicker free update display on a VGA moniotr is respectable.
circuit diagram of final version here
You could follow the light side and try some of the ideas at the end under 'light side", BUT I suspect that finding some nice modern module with VGA capability and talking to it with serial coms of some sort will be MUCH less painful.
EXAMPLE ONLY - there will be many more such:
Sparkfun say $US55/1 for
Product page
Datasheet
Features:
The µVGA-II(SGC) supports multiple resolutions within the same module. Resolutions are selectable during run time under host control. Resizeable viewing window allows partial/full screen control. 15 pin D-type standard VGA connector to interface to any external VGA monitor.
On-board micro-SD memory card adaptor for multimedia storage and data logging purposes. HC memory card support is also available for cards larger than 4Gb. Easy 5 pin interface to any host device:
Asynchronous hardware serial port, TTL interface, with 300 baud to 256K baud. Powerful, easy to use and understand built in graphics functions allow drawing of lines, rectangles, circles, ellipses, text, images, icons, user defined bitmaps and much more
Future upgrades and enhancements are easily achieved by uploading PmmC (Personality module micro Code) files. PmmC files allow the PICASO chip to be uploaded with the latest micro-Code firmware. System designers can incorporate the µVGA-II(SGC) module directly into their application, saving space and cost. Reference designs enable the user to create a platform to incorporate the µVGA-II(SGC) easily
LIGHT SIDE (some will disagree)
In the Ye Olde good old days there was the fantastic 6845 and the not so fantastic but colour capable 6847. Verily much water has flowen under the bridge since those days, but a man using a 68000 may find them still of much use. There is no doubt that better and easier has since been created, and some others may as yet tell thereof, but one or other of the above pair between them will do what you want.
From memory the 6847 was more set in its ways nad maneed som glue around i to compell it to do as you wish, but such has been done before now.
Lo & behold, and with winder I find that my memory served well enough despite the passage of years, and
Wikipedia - Motorola 6845
The Motorola 6845 (commonly MC6845) is a video address generator first introduced by Motorola and used among others in the Videx VideoTerm display cards for the Apple II computers, the MDA and CGA video adapters for the IBM PC, in the Amstrad CPC and the BBC Micro.
Its functionality was duplicated and extended by custom circuits in the EGA and VGA PC video adapters. It is related to the later 6545 manufactured by MOS Technology (Commodore Semiconductor Group) and Rockwell (in two variations) and was cloned as the Hitachi 46505 (which was used in Videx's UltraTerm card).
It is also known as the 6845 CRTC or the CRTC6845, meaning "cathode ray tube controller".
Although intended for designs based on the Motorola 6800 CPU and given a related part number, it was more commonly used alongside various other processors.
Wikipedia on Video Display Controller including
MANY OTHERS +
6845 datasheet
Motorola 6847 as above
The MC6847 is a video display generator (VDG) first introduced by Motorola and used in the TRS-80 Color Computer, Dragon 32/64, Laser 200 and Acorn Atom among others. It is a relatively simple display generator compared to other display chips of the time.
It is capable of displaying text and graphics contained within a roughly square display matrix 256 pixels wide by 192 lines high. It is capable of displaying 9 colors: black, green, yellow, blue, red, buff (almost-but-not-quite white), cyan, magenta, and orange. The low display resolution is a necessity of using television sets as display monitors. Making the display wider risked cutting off characters due to overscan. Compressing more dots into the display window would easily exceed the resolution of the television and be useless.
TI 9918 and friends - some serious power as I recall.