This connector got damaged while repairing a device, and I've been unable to identify it to replace it.
The connector is SMD mounted with the circuit board underneath based on the image above. It is 1mm pitch and has (had) 5 pins. The cable connects/disconnects by lifting vertically away from the PCB.
Socket dimensions: 7.8mm x 4.5mm x 1.4mm, 1mm pitch, pins are 1mm long 0.2mm thick.
Plug dimensions; 7.1mm x 3.7mm x 1.2mm, the cable ends appear to be crimped.
Cable end (the empty connection was always empty, the connector has space for five connections, only four are used):
Best Answer
Looks like a Molex Pico EZMATE header WM4461CT-ND and the plug WM4462-ND. Those are Digi-Key numbers as I found them there but Molex parts are available all over. Pitch on these two parts is 1.20MM