I understand how the capacitor "holds" charge. If one plate is positive, and the other is negative, the particles are attracted to each other. Connect both sides by a wire and instant flow.
However, I am confused why the charge gets built up on the capacitor in the first place when connected to a battery? There's no complete circuit.
However, everything I find online says that plate that's connected to the positive side of the battery will give up electrons that will flow through the battery to the other side? How does this even make sense?
As far as I understand it, a chemical reaction in the battery pushes the negative ions to one side and the positive ones to the other. Thus when I hook up the battery via a wire, the electrons have a direct path from the negative side to the positive side.
That's totally different than taking electrons from one side of a capacitor? To sum up, why is it that just nothing happens when I hook up a capacitor?
Best Answer
Initially, the capacitor can be thought of as neutral. Meaning, it has no net charge. A mix of positive and negative charges on both plates (well call them upper and lower plates to identify which is which).
When you connect a battery, you have current flow. It doesn't matter if the circuit is open or close (from the perspective of the source, it does not know what is 1nm, 1mm, or 1m ahead of it). So you have these positive charges that start to loiter around the upper plate. At first, first, its 1 charge, 2 charge, 10 charges and it keeps doing that until the entire surface area of the plate is the same charge. At this point, there is no current flow on the capacitor because there is no longer a change in the electric field.
But as the feild is changing, (such as when the charges are accumulating), the positive charges on the upper plate, attract negative charges on the lower plate. But in order of a negative charge to accumulate on the lower plate, a positive charge on the lower plate needs to be....displaced...from the lower plate. Essentially being kicked out from that spot.The plates have finite space, so there is only enough room for so many charges. This repeats until every positive charge has attracted a negative charge.
This is how current flows in a capacitor. Through what is called, displacement current.
This is why current in an uncharged capacitor is instantaneous, and exponentially tapers off, as the charge builds up, there is less and less negative charges needed and so less and less positive charges get displaced.