How can I calculate the total resistance of resistors combination between points a and b ?
I have already designed the circuit and added a 1 A current source between a and b.
For dependent current source I used component g (voltage dependent current source).
Solving node equations I was able to find Rab using Ohm's law .
According to my calculations V1 = 1.8282… V and V2 = 5.4545… V .
Rab = Vab / 1 = Vx
My question is how can I find voltage Vab = Vx ?
Best Answer
Ignoring the problem pointed out in comments where you didn't correctly capture the schematic,
Your
b
node is connected to ground so its voltage (as reported by SPICE) is always 0.Therefore what you call \$V_{ab}\$ is what SPICE calls
V(a)
, which is reported in the screen image you provided.