Anyone used one of the FT2232H chips from FTDI?
Specifically, how do you figure out the permissible baud rates?
The data sheet is kind of vague, and I have to pick something in the 1-3 MBaud range but need to know what my options are.
USB UART FTDI FT2232H – Supported Baud Rates
ftdiuartusb
Related Topic
- Electronic – Configuring baud of USB-Serial bridge
- Electronic – Debugging tool for the FTDI FT2232H in Sync FIFO mode
- Electronic – Connecting FT2232H board (60 MHz via 2.54 mm header) to FPGA board
- Electronic – UART devices: Baud rates different by a factor
- USB Serial – FT232HL FTDI Consecutive SPI Bytes Delay Problem
- USB – Is Host USB to Serial (FTDI) and Back to USB (FTDI) Possible?
Best Answer
I had this problem too. FTDI considers it more a driver issue than a chip issue. Head over to the FTDI App Notes area and look at the "AN_120 Aliasing VCP Baud Rates" PDF appnote.