Inspired by this question:
What is the basic difference between AM and FM radio?
I got to wondering: If I put my FM radio on some radio channel (Let's just say 100 MHz to pick some number), shouldn't it just pick up whatever is transmitted at 100 MHz? If you modulate the frequency you are transmitting with, why do I not only pick up, essentially, the equivalent of an AM signal at 100 MHz, instead of picking up on frequencies that are not 100 MHz (Since they've been Frequency Modulated, they're not 100 MHz, which is what my radio is on).
Now obviously FM radio WORKS, so I must be misunderstanding something – but what?
Is this question "why does it pick up a band (100MHz to eg. 100MHz+20kHz) rather than a single point frequency?" – pjc50 5 mins ago
Yes, that is a fair rephrasing. In my head, an antenna is built + filtered for one frequency. If it's picking up stuff at other frequencies, that's unpredictable and definitely not a way to transfer a signal – yet clearly I'm wrong. How?
Best Answer
Your FM radio works because it receives a band of frequencies around the frequency it shows or that you tune it at. As you say, the nature of FM means that the frequency will vary. However, the extent of these variations is well defined, and the radio is designed to "find" the carrier anywhere in this range.
This may surprise you, but AM also requires the receiver to pick up a range. I'm not going to go into Fourier analisys right now, but basically changing amplitude is adding frequencies. Put another way, a true pure single frequency can't ever change in amplitude and can't carry any information.
The way AM works, there is a frequency band on either side of the carrier that is the width of the highest frequency that can be transmitted. For example, if the signal being modulated onto the AM carrier can be up to 10 kHz, then there is a 10 kHz band of stuff on either side of the carrier. In fact, the carrier is constant and the actual information is in these side bands. Yes, I know that may be unintuitive, but at the level you are asking and what I have time to explain here you'll just have to trust me on this. Look up Fourier analisys if you want to learn more.
For example a AM radio station a 1 MHz carrying up to 10 kHz content will have a signal spread out over the range of 990 kHz to 1.01 MHz.