I have subcircuits of a solar cell (resistors and diodes) in LTSPICE. I want to connect the solar cells (sub-circuits) together. However, each solar cell has a different temperature. I can set the temperature of the program with .Temp
but how can I change the temperature of each sub-circuit separately.
Electronic – How to change the temperature of sub-circuits in LTSPICE
ltspicepspicespicesubcircuittemperature
Related Topic
- Electronic – LTSpice parametric subcircuit instances
- Simulation LTSpice Subcircuit – How to Make LTSpice Sub-Circuits Available Globally?
- Electronic – LTSpice – How to specify the component model name through .param directive
- Electronic – LTSpice: Can I vary schematic temperature over time
- Electronic – Creating a temperature-dependent solar cell in LTSpice (using varistors)
- Electronic – Does the load at where Pmp of a solar panel is oberved change with temperature
Best Answer
There are a few ways.
You can add it to the actual model you are using as a final parameter or use the component dialog box:
To get this dialog for anything that has a .model statement, use CTRL + right click.
If you are adding the temperature command within the SPICE listing, it needs the format of "temp=xx"; no dot required. The listing you show has omitted the '='.