I have a somictone headphone and I want to repair its headphone jack, It contains five colored wires.
Here are the wire and TRS jack.
Please give me a feedback
Can you please tell me how to wire this?
I really appreciate your help.
Electronic – How to connect 5 colored wire headphone to 3.5 TRS jack
audioaudio-codecheadphonestrs
Related Solutions
On the mechanical option for disconnecting speakers...
This is as old as the hills...probably 1960's. (An interweb search for '3.5mm socket changeover buy' leads you to some.)
1 is GND 2 is AmpL and normally connected to 4 SpkrL 3 is AmpR and normally connected to 5 SpkrR
When you plug the headphones in, 2/3 are sprung away from 4/5 to disconnect the speakers and are now connected to the headphones. Unfortunately, all of the speaker power is now being thumped into the headphones. If the headphones have a different/higher impedance to normal speakers, as they certainly do these days, it sounds trebley.
On the electronic option...
Here's an example circuit, showing one way of doing it. When the headphones are plugged in, the resistors pull the detect voltage to high and constant. This signals to the amplifier circuit to deliver a signal suitable for headphones.
yes you may use TRS wire. If you can connect it properly.
Best Answer