We have been using the Allegro UDQ2559LB. This is a quad (4 channel) low side power driver (used to drive relay and lamp loads) with about 0.5 amp per channel capability and overload, short circuit, and over temperature protection. Allegro is shutting their fab and discontinuing this part. Any one have suggestions for a good replacement? 4 channels would be ideal and the part must be surface mount.
Electronic – Looking for a quad low side power driver IC
driver
Related Topic
- Electronic – use a dual high-side low-side gate driver as a dual low-side driver
- Electronic – High and Low Side Driver vs. Half-Bridge Driver
- Electronic – Push-Pull driver for low side mosfet — is it a good idea
- Electronic – How to deal with analog pin drivers with output switching
- Electronic – MOSFET DRIVER- HIGH side vs LOW side
Best Answer
This part and this one from IR are dual channel drivers in an SO-8 package. You maybe could use two of these.