Electronic – Looking for capacitance and voltage rating – How to read electrolytic SMD capacitor labels

codedatasheetelectrolytic-capacitorsurface-mount

I need to replace an SMD capacitor on a board. The printing on it says

F1
560
2.5z

I have googled intensely but have been unable to find information on how to read such a codes.

I need to find out its capacitance and voltage. I think it could be 560uf, but I need to be sure of that and still have to find out the volatage rating.

Also would it be ok to replace an SMD electrolytic capacitor with a standard through-hole electrolytic one of the same capacitance and voltage rating?

I am adding picture of the relavant part below:

Inside the red square is the capacitor I need help with
Inside the red square is the capacitor I need help with

Inside the red reactangle on top there are two other SMD capactor presumably from the same manufacturer. I posted these as well in the hope it may help to find out the manufacturer of the cap I need to replace.
Inside the red reactangle on top there are two other SMD capactor presumably from the same manufacturer. I posted these as well in the hope it may help to find out the manufacturer of the cap I need to replace.

Can somebody please help me?

Thanks.

Best Answer

I think you have a (warning, PDF) Lelon series VEZ 560µF, 2.5Volt VEZ is a low ESR series.

The markings are as follows:

  1. F1 - Date code. I couldn't find a key for the date code.
  2. 560 - 560µF
  3. 2.5Z - 2.5Volts, Z is the short code for the VEZ series.

enter image description here

Here is a list of PDFs for the various Lelon capacitor series.

Related Topic