I bought LOGO 12/24RC PLC from SIEMENS, and I didn't try it yet because I am worry about the required voltage needed to switch it on. I tried to see the data sheet but I confused with lots of data. If any one has any idea I will be thankful.
Here is the data sheet for LOGO 12/24RC
Electronic – Power supply of LOGO 12/24RC PLC from SIEMENS
power supply
Related Solutions
Most power supplies come with the standard banana connectors and screw-on terminals. The BK 9213A has a datasheet link that specifically states banana jacks,
If you don't have the banana connector on hand, you can also screw a wire into a hole in the banana jacks.
However, buying banana connectors is definitely the right way to go for long term use.
But the supply specs I use says it is cc not cl. Could you expound on it if you have any idea?
Look at the front page of your manual: -
Now look at the other link you provided: -
Best Answer
In Appendix A of the data sheet you have all the information you need:
So you can run the LOGO 12/24 from anything between 10.8V and 28.8V