I want to change the shape of my board in eagle, e.g. I want to create a hexagon instead of the square. Unfortunately I only found the possibility to move the square-edges around and increasing or decreasing the size of the board, but I could not find a possibility to add or remove edges. Is it possible in eagle to reshape the board? And if yes, how can I do that?
Electronic – Reshaping the board in eagle
eagle
Related Topic
- Changing pad shape/size selectively on an inner layer in Eagle
- Electronic – Connecting Custom Metric Part in Eagle
- Electronic – Eagle: Selecting a group by signal name
- Electronic – Eagle PCB change drill size of all vias of a specific size
- Electrical – Eagle: Autoroute only gnd and vcc net with using only vias
- Electrical – Designing footprint for LFCSP CP-8-13 what should be the pad size
- Electrical – Export Gerber File from Keysight ADS and import in Eagle
- Electronic – Can you integrate an electromagnetic coil (torque rod) to a PCB design in EAGLE
Best Answer
Press the
Wirebutton on the left menu, then select theDimensionlayer, then draw the custom shape you wish. You will want to delete the default square shape (4 lines) via thedeletebutton.