cortex-m3debuggingkeilstm32
Im having problem at debugging, tried to load basic led toggle program for test purpose and its work fine but when i tried to debug it, im getting " Cannot Access Target, Shutting Down Debug Session ". My other concern is this device has 256 KBytes Flash Memory though at keil there is only 512 KBytes option. Hoping to get some information from you about this problem. Thanks for your time.
MCU = STM32F103CVT6
IDE= Keil 5.34.0.0
Please check the pin package of target which you have configured in 10.5 code warrior IDE. I also had same error and able solved the problem.
Yes, this is possible. In Code Composer, Go to Debug Configurations, then select Target, then MSP430 properties. There are five options, depending on whether you want to erase main memory only, or main and information memory, or protected memory etc. See below:
Best Answer
Well i though this problem was kinda weird but when i found out cubemx generated this code "__HAL_AFIO_REMAP_SWJ_DISABLE();" in "void HAL_MspInit(void)" function. I kinda laughed ^^ and delete it. People who have a similar problem hope will see this answer before spending much time...