What are the advantages of stranded vs solid wire?
what should i be using for prototyping circuits?
Best Answer
Solid wire (24 gauge) is good for use as jumpers in solderless breadboards. Trying to push in stranded wire is frustrating. Solid wire holds its shape, so you can route wires along a path and they'll stay there.
Use stranded wire for everything else. It is flexible so it's good for cables going between a circuit board and knobs/switches on an enclosure, connecting cables between circuit boards, or any time you might have physical flexing in a wire. 24 gauge is a good all-around size for stranded too.
I think this is what you want, http://www.bulkwire.com/product.asp?ProdID=21718&CtgID=6578 I was looking for teflon wire for a project, but noticed they seemed to have a decent selection of other types of wire. No idea if they are the best price, but seem reasonable (I welcome feedback on this). They only seem to have 18 gauge wire but it is the type of wire you are asking about. Hope this helps!
I have always used a dab of solder on stranded wire when needing to use it in a breadboard. It has always worked perfectly for me. Just be careful to make sure that you do not have any excess solder at the end as the wire tends to get stuck in the breadboard if there is anything sticking out that can get caught on it.
I know you asked for local, but here are a few links to items similar to what I have used before:
Best Answer
Solid wire (24 gauge) is good for use as jumpers in solderless breadboards. Trying to push in stranded wire is frustrating. Solid wire holds its shape, so you can route wires along a path and they'll stay there.
Use stranded wire for everything else. It is flexible so it's good for cables going between a circuit board and knobs/switches on an enclosure, connecting cables between circuit boards, or any time you might have physical flexing in a wire. 24 gauge is a good all-around size for stranded too.