Does anybody know the name of the cable that should be inserted in this connector? I lost it so I cannot make a picture.
I know it is a power cable where the other side is inserted in a 200-240 V (non grounded) Dutch (European) wall socket/out.
These types come in two sizes, the most generic is slightly bigger, this one is smaller (but for both I don't know the name).
The distance between the pins is about 6 mm, the horizontal distance 11 mm, and the height around 6 mm.
Brand: Philips
Type : Hair (not beard) shaver
Model: (I will add this later, not near the device)
Type : Power connector (other end of cable to ungrounded Dutch/Europen 220 V wall outlet/socket)
Marks: (I will add this later)
Update:
The model is Philips, HC3410. I could find an adapter but those are over 30 euro including shipping (more than the entire product). However, I found via AliExpress and a Dutch site a compatibility list so I hope it will work. I will not in 2 to 8 weeks.
For those who are interested:
Compatibility list: Compability list
Adapter: Adapter at AliExpress
Best Answer
Your device is likely a Philips Norelco shaver. It is a DC low-voltage polarized connector which was used after it was decided that unconnected line-voltage cords and sinks don't mix. I believe it is proprietary, I haven't seen it anywhere else. If you want a replacement, just look for the proper charger for your model of razor.