I understand that unless you fall into some specific product categories that are exempt from FCC regulations, electronic products sold in the US are legally required to meet FCC EMC limits. However, there has been a lot of debate recently with some colleagues about what, if any, testing at a NRTL to safety standards is required for the US.
My understanding is that safety requirements are driven by OSHA in the US. However, my understanding is that they really only have the power to "recommend" and not really any legal authority. I've also heard it be said that local counties / cities / states may require adherence to safety standards, but I've never heard of this before other than standard electric code type stuff.
Having recently received proposals from various regulatory agencies for European approval of a product, all of which suggested different standards to test to, sometimes not even having internal agreement about what we should test to, I'm thoroughly convinced that for anything but very established product categories no one has any clue about this stuff. If you have a novel product, forget about it… And now that functional safety seems to be becoming a bigger concern things seem to be getting even worse.
I'll try to stop myself from going off on a rant about how overambitious governments and regulatory agencies are destroying innovation and causing massive inefficiency in product development, but do any safety / legal experts here know if, for the USA, there is any "legal" requirement to worry about anything other FCC for consumer electronic products (e.g. not medical or anything special like that). Does OSHA have any legal authority?
Best Answer
To answer your question vaguely: no, there is no one set of golden rules which the U.S. follows as a whole when it comes to electrical matters.
It's the National Electrical Code which makes mention of 'listed' or 'labelled' devices, which is where the NRTLs come into play (UL, CSA, etc.). OSHA approves the NRTLs. The requirements will vary a bit from state to state depending on which code (if any) has been adopted.
Here's a map of the USA showing which states have adopted which versions of the NEC:
There are a few states which haven't adopted any version of the NEC, but have local jurisdictions (counties or cities) which have either adopted the NEC or some 'equivalent' laws.
That being said, I don't agree with your bashing of safety certifications. I personally will never plug an unlisted device into any outlet in my home. I've disassembled some of these 'cheap' gadgets with only China Export marks (meant to look like the European CE mark) or with counterfeit UL marks, and am stunned by just how unsafe these things can be. No creepage/clearance, insufficient wire gauge, damaged wire insulation, improper/no earthing, unconnected earth wires, inadequate fuses, the list goes on and on.