Simple Series Circuit: depending where the resistor is, I get different results. Explanation

ledresistorsseries

I am building a very simple Series circuit with a better (9V), two LEDs (Red, 5mm) and a resistor (220Ω). See the circuit below.

Now, when I connect it all together, here is what happens:

1) (+), LED1, LED2, Resistor, (-): only LED1 lights up (that's the example on the picture)

2) (+), Resistor, LED1, LED2, (-): both LEDs light up

3) (+), LED1, Resistor, LED2, (-): both LEDs light up

So turns out, my circuit doesn't work when the resistor is connected directly to (-).

I have been told that in such simple circuit it doesn't matter where is the resistor.

Does anyone have an explanation to this?

Thank you! 🙂

Series Circuit

Best Answer

All of the pins in Row 12 are connected, so the current flows directly from LED 1 to the resistor, without traversing the 2nd LED. Put the lower lead of the 2nd LED and the lead of the resistor into another row and that will force the current to flow through the 2nd LED, lighting it.

Related Topic