I have built a small amplifier circuit around two LM741 op-amps and have had to learn the hard way, as I usually do :), that the LM741 is not a rail-to-rail output op amp.
I have a 0-3.26V input which is to output -10V to +10V, and the circuit is being supplied by +/- 10V so I am not getting near the output needed.
Would someone be able to suggest a rail-to-rail dual-power (I'm assuming as I have +/- 10V output) that can easily replace the LM741.
By easily replace I mean pop one out and pop another in :), same connection diagram. Thanks a million for any help.
Best Answer
Check out the TS912, you can get it in DIP easily and it should fill your requirements.
The downside is that it isn't really pin-compatible, you'd have to make a couple changes.