Cisco – Migrating from Cisco ASA 5508 to Cisco Meraki Firewall Appliance at small office

ciscocisco-asa

At a small remote office my boss decided to buy a Meraki Firewall device with Wireless to replace an old Cisco ASA. The setup looks pretty straight forward. We have 5 public IP addresses for an e-mail server, 2 web servers, our ASA outside interface and the last one is used for PAT on the ASA.

In the Meraki dashboard it was easy to set up 1:1 NAT for our servers and I have the outside interface public IP configured but where do I conigure the PAT internet address that all of our internal clients use to get on the internet?

I appreciate the help.

Best Answer

You are looking for the section named 1:Many NAT on this page https://docs.meraki.com/display/MX/Firewall+settings.

The relevant portion is summarized here.

  1. Click the button labled Add 1:Many IP
  2. Enter the Public IP address and Uplink values
Related Topic