I'd be happy to post the config or logs for reference but I am having trouble getting my remote access VPN working on the same interface as my site to site IPSEC VPN. I am using a dynamic crypto map for the remote access vpn but it looks like it is failing trying to do phase one. Would anyone be able to give me a simple example config to work off of?
EDIT:
Here is a debug dump from it failing after implementing ISAKMP profiles per suggestion below. I am prompted for username and password but then it times out. It looks like the isakmp authorization is failing. Currently isakmp authorization is just set to the local user list. Does that appear to be the problem to you guys?
Jul 3 16:40:44.297: ISAKMP/aaa: unique id = 29277
Jul 3 16:40:44.297: ISAKMP:(0):Proposed key length does not match policy
Jul 3 16:40:44.297: ISAKMP:(0):atts are not acceptable. Next payload is 3
Jul 3 16:40:44.313: ISAKMP:(0):ISAKMP/tunnel: setting up tunnel REMOTEACCESS pw request
Jul 3 16:40:44.313: ISAKMP:(0):ISAKMP/tunnel: Tunnel REMOTEACCESS PW Request successfully sent to AAA
Jul 3 16:40:44.317: ISAKMP:(0):ISAKMP/tunnel: received callback from AAA
AAA/AUTHOR/IKE: Processing AV tunnel-password
AAA/AUTHOR/IKE: Processing AV addr-pool
AAA/AUTHOR/IKE: Processing AV inacl
AAA/AUTHOR/IKE: Processing AV dns-servers
AAA/AUTHOR/IKE: Processing AV wins-servers
AAA/AUTHOR/IKE: Processing AV route-metric
Jul 3 16:40:44.317: ISAKMP/tunnel: received tunnel atts
Jul 3 16:40:44.341: ISAKMP AAA: Deleting old aaa_uid = 29277
Jul 3 16:40:44.341: ISAKMP AAA: NAS Port Id is already set to 174.98.136.27
Jul 3 16:40:44.341: ISAKMP:(0):AAA: Nas Port ID set to 174.98.136.27.
Jul 3 16:40:44.341: ISAKMP AAA: Allocated new aaa_uid = 29278
Jul 3 16:40:44.341: ISAKMP AAA: Accounting is not enabled
Jul 3 16:40:48.337: ISAKMP AAA: NAS Port Id is already set to 174.98.136.27
Jul 3 16:40:48.337: ISAKMP/Authen: unique id = 29278
Jul 3 16:40:48.337: ISAKMP:(2110):AAA Authen: setting up authen_request
Jul 3 16:40:48.337: ISAKMP:(2110):AAA Authen: Successfully sent authen info to AAA
Jul 3 16:40:48.337: ISAKMP:(2110):AAA Authen: Local Authentication or no RADIUS atts recvd
Jul 3 16:40:48.349: ISAKMP:(2110):ISAKMP/author: setting up the authorization request for REMOTEACCESS
Jul 3 16:40:48.349: ISAKMP:(0):ISAKMP/author: received callback from AAA
AAA/AUTHOR/IKE: Processing AV tunnel-password
AAA/AUTHOR/IKE: Processing AV addr-pool
AAA/AUTHOR/IKE: Processing AV inacl
AAA/AUTHOR/IKE: Processing AV dns-servers
Jul 3 16:40:48.349:
AAA/AUTHOR/IKE: no DNS addresses
AAA/AUTHOR/IKE: Processing AV wins-servers
Jul 3 16:40:48.349:
AAA/AUTHOR/IKE: no WINS addresses
AAA/AUTHOR/IKE: Processing AV route-metric
Jul 3 16:40:48.349: ISAKMP:(2110):ISAKMP/author: No Class attributes
Jul 3 16:40:48.349: ISAKMP:FSM error - Message from AAA grp/user.
I also see these errors when I do debug isakmp and ipsec errors and pull the logs:
Jul 3 16:32:33.949: insert of map into mapdb AVL failed, map + ace pair already exists on the mapdb
Jul 3 16:32:57.557: ISAKMP:(0):Proposed key length does not match policy
Jul 3 16:32:57.557: ISAKMP:(0):atts are not acceptable. Next payload is 3
Jul 3 16:33:00.637: ISAKMP:FSM error - Message from AAA grp/user.
Best Answer
Taking a shot in the dark here because there are a lot of variables you didn't mention. Please update the question to include the specific technologies you are using, your currnet config, and the error you are getting. But if you are using for instance, DMVPN + EZVPN, you will probably have to use keyrings and multiple ISAKMP profiles. Since you point to phase 1 issues I would check that. The following links give reference configs for DMVPN and EZVPN and L2L+EZVPN. You should be able to modify to suit your needs.
Here's a ISAKMP Profile reference for some lunchtime reading.