I am running CME 8.6 on a Cisco 2811. I would like to install NM-CUE and run CUE 7 with this. It this possible, even with a version mismatch?
CME and CUE Versions – Can Different Versions of CME and CUE Be Used Together?
ciscohardwaretelephonyvoip
ciscohardwaretelephonyvoip
I am running CME 8.6 on a Cisco 2811. I would like to install NM-CUE and run CUE 7 with this. It this possible, even with a version mismatch?
Best Answer
Mixing versions like this, depending on which version of CME and CUE you are using, will work in some instances.
In your particular case however, it appears that the answer is no.
CME 8.6 will only work with CUE versions 7.3, 7.4, 8.5, and 8.6.
Since you're talking about a plain NM-CUE in a 2811, that module will only support up to CUE version 7.0. Your best bet for a hardware solution would be the NME-CUE, which can support up 8.6 in my testing.
The other option, depending on your other requirements for 15.(1)M4, would be to roll back to an older IOS on the 2811 for an older CME.
See the Cisco Unity Express Compatibility Matrix and the Cisco Unfied CME and Cisco IOS Software Compatability Matrix for more information.