I am trying to assign addresses in the given topology but I am having overlapping problems whenever I try to assign addresses to the routers interfaces. I have included the table of sub netting I performed for the network. I am supposed to have one pc on each switch and assign it an address and gateway. Would any body be able to help me in relation to assigning addresses to each pc? Many thanks and I would be very grateful of any help
Cisco – VLSM host ip address assigning
cisco
Related Topic
- Cisco 7600 MUX-UNI on SRE IOS
- Cisco – Devices behind Catalyst 2960 not receiving DHCP addresses
- Cisco IPv4 IP Address – Implementing a Secondary IP Address
- Cisco – Assigning IP addresses to FastEthernet
- Cisco 2811 – VLANs, Subinterfaces, and HWIC-4ESW Configuration
- Cisco OSPF – How to Assign All Interfaces to OSPF Backbone Area
- NAT VLANs – Handling Same IP Subnets and Addresses
Best Answer
For Net A you are using a /22, but the chart shows each network is a /24. A /22 would actually look like:
What you listed is actually four different subnets:
You have a similar issue with Net B /23. Actual /23 network:
For your /30 networks everything is correct except the broadcast addresses. Actual broadcasts: