I have two ipsla operations set up:
ipsla
operation 10
type icmp echo
source address 10.0.0.1
destination address 10.0.2
frequency 30
operation 11
type udp jitter
tos 128
source address 10.0.0.3
destination address 10.0.0.4
destination port 10001
frequency 30
With operation 11, I can SNMP walk 1.3.6.1.4.1.9.9.42.1.5.2.1 to get the values that match with sh ipsla stats 11
. However, I cannot find the MIB to walk to get the values for sh ipsla stats 10
.
The router is running Cisco IOS XR Software (Cisco ASR9K Series), Version 4.2.3[Default]
What are the MIBs for an IPSLA operation configured to use ICMP echo?
Best Answer
I found out the MIBs. For the IPSLA types,
udp jitter
,icmp echo
andicmp path-echo
, the RTT and connection status are stored in the rttMonLatestRttOperEntry table