Continual Ping in Cisco Packet Tracer

Based on you comments, it seems that you first problem is that you don't know how to subnet, and you need to divide your 23.12.0.0/24 network into four subnets. You can do this by using /26 networks.

Assign a different /26 network to each of the sites, and you will need a network different than the site-assigned networks for you router-to-router link. Usually, you will use a /30 or /31 network for a point-to-point link like you have between the routers.

Once you have the networks correctly assigned, you can set up your routing. Each router will inherently know about the networks directly connected to it, but the router will need to be told about the networks on the other side of the other router. You can do this with static routes (this doesn't scale well), or you can run a common routing protocol between the routers that will automatically tell each router about the networks connected to to the other router.

Two options:

1. Single click on the computer's name. A text box might pop up (worked intermittently for me in 6.2) where you can input a new name.

2. Click on the computer, go to Config, and change the display name.