I have 3 WAN connections and a remote site with a single WAN address.
What I'd like to do is monitor the latency towards the remote site using a single machine (Opsview) on our LAN but through all 3 WAN links.
I know I can tag the packets using DSCP but I wasnt able to determine if it's possible to route the traffic via the Fortigate unit accordingly.
Fortigate – Routing DSCP Tagged Packets Through Different WAN Connections
dscpfortigatefortinetrouting
Related Topic
- Routing between branches
- Vpn – Access FortiClients from LAN
- Vpn – FortiGate Site-to-Site VPN with Client VPN
- Fortigate 1000c – Do You Need to Reboot After Modifying Static Route?
- Fortigate 50e – Setting Up Conditional Forwarding
- Fortigate – Link Monitoring and Failover Configuration
- Routing – Fortigate and ipv6 routing
Best Answer
You want to configure up policy based routing. In the gui this is found: Router > Static > Policy Routes. You can do this by using TOS rather than DSCP.
WAN1: Incoming interface: LAN Source Address: Opsview Machine IP Destination Address: Remote Site WAN IP TOS: Assigned Value Outgoing Interface: WAN1 Gateway Address: Next-hop for that WAN.Do the same for the other WAN links changing the appropriate values.