I'm working with routing instances on the Juniper SRX. When you configure NAT you have the option to specify "to" and "from" statements, with these option you can specify NAT to translate to or from a routing instance. On the Routing Instance list you get, you can configure the "default" routing instance. I'm assuming that every interface that wasn't assigned a specific routing instance belongs to the default but I want to be sure, is there a way to verify?
Thanks!
Best Answer
There are a couple of ways you can check
show interfaces routing-instance all terse
which will list all interfaces and their routing instance (See example)show confiuration routing-instances
which is going to show the configuration of any routing instances you have, you will need to check out the interface stanzaExample
The below shows the interfaces are all in the default instance except fe-0/0/6.0 which is in a routing instance called
test