Speed benefits when switching from 1Gb copper LAN to Fiber Optic

bandwidthfiberlanspeed

We are trying calculate how will the network performance improve when we switch from 1Gb copper LAN to Fiber Optic.

We have 5-20 people simultaneously working on a Server via the 1Gb LAN.
There are constant read-write operations since we work with graphics, e.g. image sequences, large video files, etc.

The real transfer speed for a single user on a good day is around 50MB/s (0.4 Gb).

We would like to know the more or less average increase in speed (for a single user as mentioned above) should we switch to Fiber Optics. I looked everywhere for any real-life values but there are only theoretical numbers.

Thanks!

Best Answer

You are conflating many things here, so let's try to detangle the issues in your question.

  1. Data rate is data rate, regardless of the physical medium. A 1Gb connection has the same data rate whether it is fiber or copper.
  2. As @toddwilcox mentions, the advantages of fiber over copper are longer spans and electromagnetic isolation. Data rates are independent of the medium.
  3. Transfer rates depend on every link in the chain from source to destination. You can only go as fast as the slowest link. So to determine if a user's transfer rate will increase, you have to consider all of the components from the server to the user's computer.
  4. You may get a modest performance boost by fixing one bottleneck, but then you will run into another. For example, you may increase your network bandwidth, but you might then be limited by the user PC NIC, disk transfer rate, CPU, etc. The same restrictions may apply to the server too.
  5. Upgrading one component may require other upgrades too. For example, if you upgrade your network switch to 40Gb, you will need to upgrade your server's connection to take advantage of that.

You mention you get 0.4 Gb "on a good day." Have you tested when only one user is active? If the number is still in the same range, it probably isn't a network problem.

You also don't mention the kind of network equipment you have. Some consumer-grade equipment can have much poorer performance than their port speeds would indicate. In other words, they may have 1Gb ports, but be unable to forward traffic at anywhere near that speed (I should also mention that consumer-grade equipment is off topic on this forum).

Related Topic