My hardware is
(quanta10g-uha) #show hardware
Switch: 1
System Description............................. Quanta LB6M, 1.2.0.14, Linux
2.6.21.7
Machine Type................................... Quanta LB6M
Machine Model.................................. LB6M
Serial Number.................................. QTFCRW2370157
FRU Number..................................... 1LB6BZZ0STL
Part Number.................................... BCM56820
Maintenance Level.............................. A
Manufacturer................................... 0xbc00
Burned In MAC Address.......................... 08:9E:01:39:1F:A2
Software Version............................... 1.2.0.14
Operating System............................... Linux 2.6.21.7
Network Processing Device...................... BCM56820_B0
Additional Packages............................ FASTPATH QOS
How to make an interface as trunk port ?
Some discussione tell about 'switchport mode trunk',
But I only got
(quanta10g-uha) (Config)#interface 0/5
(quanta10g-uha) (Interface 0/5)#switchport ?
protected Configure Switchport to Protected mode.
Sincerely
-bino-
Best Answer
A VLAN trunk isn't explicitly formed on that switch. Simply add the VLAN
<VLID>to the interface: