I have a WiFi base station, and a WiFi range extender. Both of them have the same SSID.
When a device connects to that SSID, what exactly happens? How does the device know that base station and range extender are part of the same network and no third party can impersonate another range extender on the same network?
Then, what happens if the device moves around and signal strengths change? Is there some kind of renegotiation going on?
What does the range extender actually do? Simply rebroadcast whatever it gets from device and base station, or is it more intelligent than that?
This sounds like several questions, but if somebody had a concise explanation handy, it would probably answer all of those at the same time.
Best Answer
There are two types of wireless extenders. First would be an extender that uses some sort of mesh technology. This type of extender is typically only found within an enterprise deployment and will establish a connection to the network in addition to also acting as an AP. Often a mesh device will use two radios, one providing the "back haul" and one to provide client access.
However most devices referred to as wireless extenders fall into the second group and are actually just repeaters. When a wireless repeater receives (or "hears") a frame, it will then transmit a copy of that frame into the air. Naturally it will only hear frames on the channel to which it is configured, and typically will also be configured to only re-transmit frames for a particular SSID or BSSID.
Since RF is a shared resource, this repetition of data can result in a significant loss of performance. To reduce this impact, some repeaters are smart enough to not repeat frames where it hears both the frame and the acknowledgement between the AP and client device, but others are not and will re-transmit all frames. Even if you are using a "smarter" repeater, if the client is too far from the repeater to be heard, all AP traffic will get repeated leading to the same loss of performance.
When a client device connects, it goes through an association process with the access point. If the client is out of range of the AP, but within range of the repeater, the repeater will re-transmit the client frames as well as the return frames from the AP.
The device doesn't. When function as a repeater, the repeater itself doesn't really have any "identity" on the network (any management interface on the repeater is a separate matter). It is merely repeating the frames that it hears unchanged.
Even if a third party does place a repeater on in the area, this is not really a problem as the client device is associating (and establishing encryption) with the access point itself and not the repeater.
With most repeaters, there is no roaming or renegotiation. The client device will either see the frame from the original AP, the repeated frame from the repeater, or possibly both.
See above.